D-Bug & Automation Forum | |
D-Bug & Automation Forum >> Coding/Hardware >> Partitioning a CF - no partitions found? SOLVED!
http://d-bug.mooo.com/dbugforums/cgi-bin/yabb2/YaBB.pl?num=1252945840 Message started by ggn on 14.09.09 at 16:30:38 |
Title: Partitioning a CF - no partitions found? SOLVED! Post by ggn on 14.09.09 at 16:30:38
A few hours ago I installed a fresh new 4GB Compact Flash on my TT, using a scsi2ide & ide cf reader. All went fine and swell, HDdriver detected the card straight away, I partitioned it (for reference, 1st partition was 31mb GEM, and the rest were at most 511mb of types BGM, F32 and LNX), installed HDdriver on C: and rebooted.
Then I got a strange message: "No partitions found!" WTF? I've done this countless times on my Falcon and it has worked flawlessly. I went on to try everything under the sun in HDDRUTIL, but still no go. Tried initialising the partitions, changing boot settings, nothing at all. (note that I had done this in the past and may have encountered this before, but didn't remember how I solved it back then :)). Anyway, to cut a long story short, here's the procedure I followed and worked 100%:
I have to admit, this post is mostly for my own reference, hope it's of use to anyone :) |
D-Bug & Automation Forum » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |