D-Bug & Automation Forum
D-Bug & Automation Forum >> Coding >> STE/Falcon Blitter manual
https://d-bug.mooo.com/dbugforums/cgi-bin/yabb2/YaBB.pl?num=1280675141

Message started by ggn on 01.08.10 at 15:05:40

Title: Re: STE/Falcon Blitter manual
Post by ggn on 01.08.10 at 15:11:25
[code]Blitter Execution Times            HOP            
LOP      0      1      2      3
0      1      1      1      1
1      2      2      3      3
2      2      2      3      3
3      1      1      2      2
4      2      2      3      3
5      2      2      2      2
6      2      2      3      3
7      2      2      3      3
8      2      2      3      3
9      2      2      3      3
10      2      2      2      2
11      2      2      3      3
12      1      1      2      2
13      2      2      3      3
14      2      2      3      3
15      1      1      1      1


HOP = Halftone Operation

LOP = Logical Operation


All timings are assuming the BLITTER is the only DMA device using the BUS. If other devices are using the BUS the figures may increase.

All timing figures are given in nops per word of transfer. Ie. a value of 2 would take the equivilent time of 2 nops to transfer 1 word of data.[/code]

D-Bug & Automation Forum » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2022. All Rights Reserved.