D-Bug & Automation Forum
D-Bug & Automation Forum >> Automation/BBC/D-Bug Menus >> Gauntlet III corrupt graphics
http://d-bug.mooo.com/dbugforums/cgi-bin/yabb2/YaBB.pl?num=1318776466

Message started by official ninja on 16.10.11 at 14:47:46

Title: Gauntlet III corrupt graphics
Post by official ninja on 16.10.11 at 14:47:46
4mb MSTE, NTSC: About the 3rd "way out" down in the 1st dungeon in the game the levels turn to this:

http://img59.imageshack.us/img59/4659/g3onmegaste.th.jpg

Uploaded with ImageShack.us

Title: Re: Gauntlet III corrupt graphics
Post by ggn on 16.10.11 at 15:06:10
Okay, seriously, all this points to your memory being bad. Or it's not plugged in properly. I'd suggest unplugging all SIMMs, blowing away dust, using a contact cleaner spray, then plugging them back firmly.

Title: Re: Gauntlet III corrupt graphics
Post by Klapauzius on 16.10.11 at 15:12:27
I agree. Looks definitely like duff RAM to me.
Probably one of the modules for the higher RAM regions, which are used by both WoD and GIII, I suppose.

Title: Re: Gauntlet III corrupt graphics
Post by official ninja on 16.10.11 at 15:35:16
I was thinking the same thing.

I got this computer from best electronics. It should be under warranty for 90 days. I'll email him about the problems. Maybe he can send me new ram...

They put the stickers over the screws on the bottom that says warranty void if broken. SO, I'll contact them 1st to see what they tell me.

Title: Re: Gauntlet III corrupt graphics
Post by official ninja on 16.10.11 at 17:03:24
Ok, I ran this memtest on my Mega STe and I see this.
I don't speak german, but it looks like "error at" and a memory address. Is my ram failing these tests?

http://img687.imageshack.us/img687/5461/mstememtest.th.jpg

Uploaded with ImageShack.us

Title: Re: Gauntlet III corrupt graphics
Post by Klapauzius on 16.10.11 at 17:12:14
Yes it is.
110 Errors reported in this test.

Contact your dealer or, if you're bold, do like GGN said.  ;)

Title: Re: Gauntlet III corrupt graphics
Post by official ninja on 16.10.11 at 17:44:18

Klapauzius wrote on 16.10.11 at 17:12:14:
Yes it is.
110 Errors reported in this test.

Contact your dealer or, if you're bold, do like GGN said.  ;)


Thanks. Thats just my luck. At least I know whats wrong and can now look at getting it fixed!

Title: Re: Gauntlet III corrupt graphics
Post by ggn on 16.10.11 at 17:55:01

official ninja wrote on 16.10.11 at 17:44:18:

Klapauzius wrote on 16.10.11 at 17:12:14:
Yes it is.
110 Errors reported in this test.

Contact your dealer or, if you're bold, do like GGN said.  ;)


Thanks. Thats just my luck. At least I know whats wrong and can now look at getting it fixed!



Don't despair though, this is fairly trivial to fix. Even if your vendor can't/won't replace your ram chips, you can find tons of these on ebay (hell, I myself have sent a lot of 4mb SIMM packs to various people for free over the years), and replacing these takes about 10 mins thanks to the mste's easily accessible design.

Title: Re: Gauntlet III corrupt graphics
Post by official ninja on 17.10.11 at 20:16:03

ggn wrote on 16.10.11 at 17:55:01:

official ninja wrote on 16.10.11 at 17:44:18:

Klapauzius wrote on 16.10.11 at 17:12:14:
Yes it is.
110 Errors reported in this test.

Contact your dealer or, if you're bold, do like GGN said.  ;)


Thanks. Thats just my luck. At least I know whats wrong and can now look at getting it fixed!



Don't despair though, this is fairly trivial to fix. Even if your vendor can't/won't replace your ram chips, you can find tons of these on ebay (hell, I myself have sent a lot of 4mb SIMM packs to various people for free over the years), and replacing these takes about 10 mins thanks to the mste's easily accessible design.


So what are the specs of the Mega STe's memory requirements? What type of simms? Will any 30 pin 1mb simms work? Aslo do you need to have all 4 simm slots filled?

Thanks for all the help so far!

Title: Re: Gauntlet III corrupt graphics
Post by ggn on 25.10.11 at 06:47:31

official ninja wrote on 17.10.11 at 20:16:03:

ggn wrote on 16.10.11 at 17:55:01:

official ninja wrote on 16.10.11 at 17:44:18:

Klapauzius wrote on 16.10.11 at 17:12:14:
Yes it is.
110 Errors reported in this test.

Contact your dealer or, if you're bold, do like GGN said.  ;)


Thanks. Thats just my luck. At least I know whats wrong and can now look at getting it fixed!



Don't despair though, this is fairly trivial to fix. Even if your vendor can't/won't replace your ram chips, you can find tons of these on ebay (hell, I myself have sent a lot of 4mb SIMM packs to various people for free over the years), and replacing these takes about 10 mins thanks to the mste's easily accessible design.


So what are the specs of the Mega STe's memory requirements? What type of simms? Will any 30 pin 1mb simms work? Aslo do you need to have all 4 simm slots filled?

Thanks for all the help so far!


Just for the record, you should look for 30pin simms, 1mb each. I think that anything above or equal to 60ns should be ok.

Title: Re: Gauntlet III corrupt graphics
Post by official ninja on 25.10.11 at 15:02:52
For the record, got new Simms from the dealer and the machine works great now. Including Gauntlet III and Wings of Death.  ;D

D-Bug & Automation Forum » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2024. All Rights Reserved.