D-Bug & Automation Forum
D-Bug & Automation Forum >> Automation/BBC/D-Bug Menus >> Gauntlet III corrupt graphics
http://d-bug.mooo.com/dbugforums/cgi-bin/yabb2/YaBB.pl?num=1318776466

Message started by official ninja on 16.10.11 at 14:47:46

Title: Re: Gauntlet III corrupt graphics
Post by ggn on 25.10.11 at 06:47:31

official ninja wrote on 17.10.11 at 20:16:03:

ggn wrote on 16.10.11 at 17:55:01:

official ninja wrote on 16.10.11 at 17:44:18:

Klapauzius wrote on 16.10.11 at 17:12:14:
Yes it is.
110 Errors reported in this test.

Contact your dealer or, if you're bold, do like GGN said.  ;)


Thanks. Thats just my luck. At least I know whats wrong and can now look at getting it fixed!



Don't despair though, this is fairly trivial to fix. Even if your vendor can't/won't replace your ram chips, you can find tons of these on ebay (hell, I myself have sent a lot of 4mb SIMM packs to various people for free over the years), and replacing these takes about 10 mins thanks to the mste's easily accessible design.


So what are the specs of the Mega STe's memory requirements? What type of simms? Will any 30 pin 1mb simms work? Aslo do you need to have all 4 simm slots filled?

Thanks for all the help so far!


Just for the record, you should look for 30pin simms, 1mb each. I think that anything above or equal to 60ns should be ok.

D-Bug & Automation Forum » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2024. All Rights Reserved.