Page Index Toggle Pages: 1 Send TopicPrint
PC software to write back ST images to floppy (Read 1391 times)
Phill
Distributor
**
Offline


D-BUGer

Posts: 54
Joined: 19.10.09
PC software to write back ST images to floppy
12.01.10 at 20:04:23
Print Post  
I want to put the Hunter crack I did back to disk.  Theres nothing special about the format, is there any PC software I can use to write it back down to disk so I can actually take a look at it on my real STe?

i've got a laptop with a USB floppy drive, and 'you know who' has created software that only uses non-USB drives.

Is there an alternative?
  
Back to top
 
IP Logged
 
CJ
D-Bug member
Reboot Member
*****
Offline


D-Bug Founder

Posts: 1205
Location: State of Confusion
Joined: 22.02.07
Gender: Male
Re: PC software to write back ST images to floppy
Reply #1 - 13.01.10 at 01:45:32
Print Post  
I'm assuming its 10 sectors?

You might be able to format a disk on the ST and then just write to it using something on the PC.... otherwise - create an MSA, transfer the MSA over to the STe and then write it back up from there?

I've not used a real ST in forever! Just Steem Engine and my Falcon!
  

"With only one button, even drooling fucktards like Kizza can play our game!"
Back to top
 
IP Logged
 
ggn
D-Bug member
Reboot Member
*****
Offline


D-Bug debugger

Posts: 1461
Location: Somewhere in Greece
Joined: 22.02.07
Gender: Male
Re: PC software to write back ST images to floppy
Reply #2 - 13.01.10 at 21:04:28
Print Post  
We have a couple of solutions in http://d-bug.mooo.com/dbug/extras.htm

Personally HDCOPY works for me even in windows xp, and that can format and write a 10-sector floppy disk image. Otherwise Ghostlink might be a solution - see the above page for some info...
  
Back to top
 
IP Logged
 
Phill
Distributor
**
Offline


D-BUGer

Posts: 54
Joined: 19.10.09
Re: PC software to write back ST images to floppy
Reply #3 - 14.01.10 at 02:35:21
Print Post  
Thanks chaps, will probably have to MSA the image and copy it over to the ST and do it that way.

HDCopy won't do anything.  I've formatted the disk to 800k 10 sector, but when it goes to open the disk image of Hunter, it just refuses to do anything with it.

Arse!
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
 
  « Board Index ‹ Board  ^Top