23.01.26 at 17:32:45 (UTC)
(Moderators: Shw, CJ, ggn)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
10 Gauntlet III corrupt graphics (Read 7023 times)
official ninja
Distributor
**
Offline


D-BUGer

Posts: 63
Location: NJ, USA
Joined: 14.10.11
Gauntlet III corrupt graphics
16.10.11 at 14:47:46
Print Post  
4mb MSTE, NTSC: About the 3rd "way out" down in the 1st dungeon in the game the levels turn to this:



Uploaded with ImageShack.us
  
(2) Mega STe (USA) TOS 2.06,  4mb,  internal SCSI HDD
1040STe (USA) TOS 1.62, 4mb S.atanD.isk
1040STFm (USA) TOS 1.0
Back to top
WWW  
IP Logged
 
ggn
D-Bug member
Reboot Member
*****
Offline


D-Bug debugger

Posts: 1462
Location: Somewhere in Greece
Joined: 22.02.07
Gender: Male
Re: Gauntlet III corrupt graphics
Reply #1 - 16.10.11 at 15:06:10
Print Post  
Okay, seriously, all this points to your memory being bad. Or it's not plugged in properly. I'd suggest unplugging all SIMMs, blowing away dust, using a contact cleaner spray, then plugging them back firmly.
  
Babe, I'm on fire
Back to top
 
IP Logged
 
Klapauzius
Distributor
**
Offline


ULSer

Posts: 95
Location: Bavaria
Joined: 29.06.07
Gender: Male
Re: Gauntlet III corrupt graphics
Reply #2 - 16.10.11 at 15:12:27
Print Post  
I agree. Looks definitely like duff RAM to me.
Probably one of the modules for the higher RAM regions, which are used by both WoD and GIII, I suppose.
  
Back to top
 
IP Logged
 
official ninja
Distributor
**
Offline


D-BUGer

Posts: 63
Location: NJ, USA
Joined: 14.10.11
Re: Gauntlet III corrupt graphics
Reply #3 - 16.10.11 at 15:35:16
Print Post  
I was thinking the same thing.

I got this computer from best electronics. It should be under warranty for 90 days. I'll email him about the problems. Maybe he can send me new ram...

They put the stickers over the screws on the bottom that says warranty void if broken. SO, I'll contact them 1st to see what they tell me.
  
(2) Mega STe (USA) TOS 2.06,  4mb,  internal SCSI HDD
1040STe (USA) TOS 1.62, 4mb S.atanD.isk
1040STFm (USA) TOS 1.0
Back to top
WWW  
IP Logged
 
official ninja
Distributor
**
Offline


D-BUGer

Posts: 63
Location: NJ, USA
Joined: 14.10.11
Re: Gauntlet III corrupt graphics
Reply #4 - 16.10.11 at 17:03:24
Print Post  
Ok, I ran this memtest on my Mega STe and I see this.
I don't speak german, but it looks like "error at" and a memory address. Is my ram failing these tests?



Uploaded with ImageShack.us
« Last Edit: 16.10.11 at 17:03:42 by official ninja »  
(2) Mega STe (USA) TOS 2.06,  4mb,  internal SCSI HDD
1040STe (USA) TOS 1.62, 4mb S.atanD.isk
1040STFm (USA) TOS 1.0
Back to top
WWW  
IP Logged
 
Klapauzius
Distributor
**
Offline


ULSer

Posts: 95
Location: Bavaria
Joined: 29.06.07
Gender: Male
Re: Gauntlet III corrupt graphics
Reply #5 - 16.10.11 at 17:12:14
Print Post  
Yes it is.
110 Errors reported in this test.

Contact your dealer or, if you're bold, do like GGN said.  Wink
  
Back to top
 
IP Logged
 
official ninja
Distributor
**
Offline


D-BUGer

Posts: 63
Location: NJ, USA
Joined: 14.10.11
Re: Gauntlet III corrupt graphics
Reply #6 - 16.10.11 at 17:44:18
Print Post  
Klapauzius wrote on 16.10.11 at 17:12:14:
Yes it is.
110 Errors reported in this test.

Contact your dealer or, if you're bold, do like GGN said.  Wink


Thanks. Thats just my luck. At least I know whats wrong and can now look at getting it fixed!
  
(2) Mega STe (USA) TOS 2.06,  4mb,  internal SCSI HDD
1040STe (USA) TOS 1.62, 4mb S.atanD.isk
1040STFm (USA) TOS 1.0
Back to top
WWW  
IP Logged
 
ggn
D-Bug member
Reboot Member
*****
Offline


D-Bug debugger

Posts: 1462
Location: Somewhere in Greece
Joined: 22.02.07
Gender: Male
Re: Gauntlet III corrupt graphics
Reply #7 - 16.10.11 at 17:55:01
Print Post  
official ninja wrote on 16.10.11 at 17:44:18:
Klapauzius wrote on 16.10.11 at 17:12:14:
Yes it is.
110 Errors reported in this test.

Contact your dealer or, if you're bold, do like GGN said.  Wink


Thanks. Thats just my luck. At least I know whats wrong and can now look at getting it fixed!



Don't despair though, this is fairly trivial to fix. Even if your vendor can't/won't replace your ram chips, you can find tons of these on ebay (hell, I myself have sent a lot of 4mb SIMM packs to various people for free over the years), and replacing these takes about 10 mins thanks to the mste's easily accessible design.
  
Babe, I'm on fire
Back to top
 
IP Logged
 
official ninja
Distributor
**
Offline


D-BUGer

Posts: 63
Location: NJ, USA
Joined: 14.10.11
Re: Gauntlet III corrupt graphics
Reply #8 - 17.10.11 at 20:16:03
Print Post  
ggn wrote on 16.10.11 at 17:55:01:
official ninja wrote on 16.10.11 at 17:44:18:
Klapauzius wrote on 16.10.11 at 17:12:14:
Yes it is.
110 Errors reported in this test.

Contact your dealer or, if you're bold, do like GGN said.  Wink


Thanks. Thats just my luck. At least I know whats wrong and can now look at getting it fixed!



Don't despair though, this is fairly trivial to fix. Even if your vendor can't/won't replace your ram chips, you can find tons of these on ebay (hell, I myself have sent a lot of 4mb SIMM packs to various people for free over the years), and replacing these takes about 10 mins thanks to the mste's easily accessible design.


So what are the specs of the Mega STe's memory requirements? What type of simms? Will any 30 pin 1mb simms work? Aslo do you need to have all 4 simm slots filled?

Thanks for all the help so far!
  
(2) Mega STe (USA) TOS 2.06,  4mb,  internal SCSI HDD
1040STe (USA) TOS 1.62, 4mb S.atanD.isk
1040STFm (USA) TOS 1.0
Back to top
WWW  
IP Logged
 
ggn
D-Bug member
Reboot Member
*****
Offline


D-Bug debugger

Posts: 1462
Location: Somewhere in Greece
Joined: 22.02.07
Gender: Male
Re: Gauntlet III corrupt graphics
Reply #9 - 25.10.11 at 06:47:31
Print Post  
official ninja wrote on 17.10.11 at 20:16:03:
ggn wrote on 16.10.11 at 17:55:01:
official ninja wrote on 16.10.11 at 17:44:18:
Klapauzius wrote on 16.10.11 at 17:12:14:
Yes it is.
110 Errors reported in this test.

Contact your dealer or, if you're bold, do like GGN said.  Wink


Thanks. Thats just my luck. At least I know whats wrong and can now look at getting it fixed!



Don't despair though, this is fairly trivial to fix. Even if your vendor can't/won't replace your ram chips, you can find tons of these on ebay (hell, I myself have sent a lot of 4mb SIMM packs to various people for free over the years), and replacing these takes about 10 mins thanks to the mste's easily accessible design.


So what are the specs of the Mega STe's memory requirements? What type of simms? Will any 30 pin 1mb simms work? Aslo do you need to have all 4 simm slots filled?

Thanks for all the help so far!


Just for the record, you should look for 30pin simms, 1mb each. I think that anything above or equal to 60ns should be ok.
  
Babe, I'm on fire
Back to top
 
IP Logged
 
official ninja
Distributor
**
Offline


D-BUGer

Posts: 63
Location: NJ, USA
Joined: 14.10.11
Re: Gauntlet III corrupt graphics
Reply #10 - 25.10.11 at 15:02:52
Print Post  
For the record, got new Simms from the dealer and the machine works great now. Including Gauntlet III and Wings of Death.  Grin
  
(2) Mega STe (USA) TOS 2.06,  4mb,  internal SCSI HDD
1040STe (USA) TOS 1.62, 4mb S.atanD.isk
1040STFm (USA) TOS 1.0
Back to top
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board  ^Top   

D-Bug & Automation Forum » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge